﻿********************************************************************
KONICA MINOLTA Log Management Utility 1.2.28000
                                                          30/11/2025

Copyright (C) 2013 KONICA MINOLTA, INC. 
********************************************************************

This file contains information on using Log Management Utility.
Be sure to read this file before using the application.

1. Introduction
2. System requirements
3. Supported devices
4. Installing and Uninstalling the Application
5. Checking the Version in the Application
6. Notes and Restrictions
7. History of Changes

********************************************************************
1. Introduction

Log Management Utility allows you to display and manage logs of 
operations and tasks performed on an MFP .

********************************************************************
2. System Requirements
Computer:
    PC-AT compatible machine
CPU:
    Same as specified for your operating system.
Memory (RAM):
    Same as specified for your operating system.
Hard Disk:
    100 MB of available hard-disk space
Display:
    800 x 600 pixels or higher
Supported operating systems:
    Please refer to attached "Appendix1_OS_SupportInfo.txt".
    - Please use the latest version of each operating systems.
    - There may be notes/restrictions depending on your operating systems. 
      Please refer to "6. Notes and Restrictions" for additional information.
Network Environment:
    TCP/IP protocol should be set up correctly. 
Other requirements:
    Microsoft .NET Framework 3.5 (SP1 or later) and .NET Framework 4.8 or later*
    *Both versions of .NET Framework are required.
     The version of .NET Framework that is installed to your computer
     can be checked from Control Panel.
     For more information about installing (or enabling) .NET Framework, 
     please refer to the User’s Guide or the Microsoft website.

********************************************************************
3. Supported devices

Please refer to attached "Appendix2_Device_SupportInfo.txt".
There may be notes/restrictions depending on your  device. 
Please refer to "6. Notes and Restrictions" for additional information.

********************************************************************
4. Installing and Uninstalling the Application

See the User's Guide.

********************************************************************
5. Checking the Version in the Application
When "Version Information" is selected from the "Help" menu, an information dialog box appears.

********************************************************************
6. Notes and Restrictions

- When the SSL Encryption Strength of the device is set to "AES-256",
  Windows XP cannot connect to the device. When using Windows XP,
  change the encryption strength setting of the device to other than
  "AES-256".

- When SSL certificate of a device is created in DSA type, 
  connection to the device may not be performed successfully. 
  In such case, create a certificate in RSA type.

- It may take some time to launch the application. 
  In such a case, please perform the following steps.
  1) Launch Control Panel
  2) Open Internet Option under tools menu.
  3) Open Advanced tab and turn off the following setting.
     "Check for server certificate revocation"

- When "User Account Control: Only elevate executables that are signed and
  validated" is enabled at Local Security Policy of Windows Vista, it is not
  possible to uninstall program by using "Programs and Features" of Control Panel.
  To uninstall program, disable "User Account Control: 
  Only elevate executables that are signed and validated" at Local Security Policy
  of Windows Vista, or use "setup.exe" which is used at installation of program. 

- If the log cannot be obtained, enable the WebDAV server setting of MFP.

- The products described in "2. System Requirements" and 
  "3. Supported Devices" may not be available or the product
   names may differ in some countries and regions.

- Please use a Device Certificate signed with an algorithm Microsoft
  considers valid.

- The version below of the firmware of the product that connects to this application must be used. 
  For information on the firmware version of your product and upgrades, 
  contact a service center or the dealer where you purchased the MFP product.

  bizhub C650(Card Version 6B [A00H0Y0-0100-G00-6B]) or later
  bizhub C550(Card Version 6B [A00J0Y0-0100-G00-6B]) or later
  bizhub C451(Card Version 6B [A00J0Y0-0100-G00-6B]) or later

********************************************************************
7. History of Changes

Ver 1.1.00000
- Changed into an application that is used together with Device Set-Up 
  (platform application).

********************************************************************
Windows is a trademark of Microsoft Corporation in the United States
and other countries.
Other company names and product names are trademarks or registered
trademarks of their respective companies.

********************************************************************
LICENSE ISSUE
Copyright 2023 KONICA MINOLTA, INC.

Licensed under the Apache License, Version 2.0 (the “License”);
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an “AS IS” BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

See the License for the specific language governing permissions and
limitations under the License.